Bring On The Sun
SG100’s Enhanced UV Resistance and Strong Bond Means Performance and Protection can Start at the Top
SG100 For Topside Applications
Enhanced UV, environmental and chemical resistance that provides a strong, flexible bond across multiple substrates
SCIGRIP® / ARJAY’s SG100 Adhesive provides the ultraviolet and impact protection you need for topside applications, like deck exteriors and hardtops. But this performance story doesn’t stop there. SG100 also provides the strength and flexibility needed for critical bonds too, like deck to hull. Plus, it has the impact resistance required for items like hatches, doors and other items built in 2-part molds. We created formulas for both 15 and 40 minute working times, so it’s designed to work the way you do, regardless of application.
Performance Benefits
- UV stabilized, bright white color for color critical applications
- Excellent choice for bonding FRP composites, gel coated surfaces and thermoplastics with little or no surface preparation
- Outstanding fatigue, impact and shock load resistance
- Excellent environmental and chemical resistance
- Bonds range of substrates: Acrylic, PVC, ABS, Thermoset Composites (Vinyl Ester, Polyester, Gelcoats, and Epoxy), Primed Metals, Coated Metals, and other Thermoplastics
Flexible Working Times
100 comes in 15 and 40 minute working times. Just request the correct cartridge, adhesive and activator as shown in the table under "Working & Fixture Times" to the right.
Availability
| Table Header | REGULAR |
|---|---|
|
SG100 Methacrylate Adhesive |
|
|
490 ML Cartridge | 5 Gal Pail | 55 Gal Drum Multiple Working Time Formulas Available |
RECOMMENDED FOR BONDING
| COMPOSITES | Composites | Metals | Thermoplastics |
|---|---|---|---|
|
Epoxy |
Aluminum |
ABS |
|
|
Polyester/DCPD |
Carbon Steel |
Acrylics |
|
|
Vinyl Ester |
Stainless Steel |
PVC/CPVC |
|
|
Gelcoats |
Coated Metals |
Styrenics |
WORKING PROPERTIES
| GEL TIME | Cartridge | Adhesive | Activator | Working Time | Fixture Time |
|---|---|---|---|---|---|
|
SG100-15 |
SG115A |
SG115B |
12-18 min |
30-45 min |
|
|
SG100-40 |
SG140A |
SG140B |
25-45 min |
80-100 min |
TYPICAL PHYSICAL PROPERTIES
| RECOMMENDED FOR |
SG230 SERIES Uncured |
Part A Adhesive |
Part B Activator |
A+B Mix |
|---|---|---|---|---|
|
Color |
Off White |
White |
White |
|
|
Mix Ratio Volume |
10 |
1 |
– |
|
|
Mix Ratio Weight |
6.42 |
1 |
– |
|
|
Density, g/cc |
0.95 |
1.48 |
1.00 |
|
|
Density lb/gallon |
7.90 |
12.35 |
8.33 |
|
|
Vicosity cps |
150,000- 220,000 |
70,000- 180,000 |
– |
TYPICAL CURED PROPERTIES
| GEL TIME | |
|---|---|
|
Tensile Strength |
2,500-2,900 PSI (17.2-20 MPa) |
|
Maximum Tensile Elongation |
80-120% |
|
Tensile Modulus |
90,000-110 ,000 PSI (620-758 MPa) |
|
Lap Shear |
2,000-2,400 PSI (14-16 MPa) |
|
Service Temperatures |
-40 to 180℉ |
